HP Neoview Messages Manual Download Page 213

Page: 213 / 400

Recovery

Correct the syntax and resubmit.

SQL 8851

8851 A CLI Parameter bound check error occurred.

Cause

The HP Neoview database software received a call-level interface (CLI) parameter

bound check error.

Effect

The operation fails.

Recovery

Do not attempt recovery. HP support will perform recovery operations in response

to an automatically generated dial-out message about this condition.

SQL 8852

8852 Holdable cursors are supported for only streaming cursors and

embedded update/delete cursors.

Cause

You attempted to use a holdable cursor in a situation where it is not supported.

Effect

The operation fails.

Recovery

Do not attempt recovery. HP support will perform recovery operations in response

to an automatically generated dial-out message about this condition.

SQL 8853

8853 Specified attribute definition is not valid.

Cause

You specified an invalid attribute definition.

Effect

The operation fails.

Recovery

Do not attempt recovery. HP support will perform recovery operations in response

to an automatically generated dial-out message about this condition.

SQL 8854

8854 Specified attribute value is not valid.

Cause

You specified an invalid attribute value.

Effect

The operation fails.

Recovery

Do not attempt recovery. HP support will perform recovery operations in response

to an automatically generated dial-out message about this condition.

SQL 8855

8855 Statement attribute cannot be set now.

Cause

You attempted to set a statement attribute after a statement was compiled. The attribute

must be set before compilation.

Effect

The operation fails.

Recovery

Correct the syntax and resubmit.

SQL 8856

8856 Specified attribute value is not valid. INPUT_ARRAY_MAXSIZE must

be positive.

Cause

You specified an invalid attribute value. INPUT_ARRAY_MAXSIZE must be positive.

Effect

The operation fails.

Recovery

Do not attempt recovery. HP support will perform recovery operations in response

to an automatically generated dial-out message about this condition.

213

Summary of Contents for Neoview Messages

















































































































































































































































































































































































































Search results

Summary of Contents for Neoview Messages

Reviews:

Brands by name

Popular brands

HP Neoview Messages, Manual

Search results

Summary of Contents for Neoview Messages

Reviews:

Brands by name

Popular brands