HP msm3 series, Installation And Getting Started Manual

Page: 14 / 132

Introduction
About this guide
1-2
About this guide
This guide provides the following information for MSM Access Points (APs):
 Hardware overview
 Safety and regulatory information
 Installation procedure
For those using an AP in autonomous mode, an initial configuration procedure is also
provided. This procedure is unnecessary for those using an AP in its factory-default
controlled mode.
 For APs used in autonomous mode, see the MSM3xx / MSM4xx Access Points
Management and Configuration Guide .
 For APs used in controlled mode, see Working with controlled APs in the MSM7xx
Controllers Management and Configuration Guide.
These guides are available as described in Online documentation on page 1-5 at end of this
chapter.
Products covered
This guide provides autonomous-mode information for the following MSM3xx and MSM4xx
Access Points (“WW” identifies worldwide versions for the rest of the world):
Information for the above three APs is primarily provided in the E-MSM430, E-MSM460, and
E-MSM466 802.11n Access Points Quickstart . See also Regulatory information on page 9-1
for information applicable to these APs.
Model WW Americas Japan Israel
E-MSM430 J9651A J9650A J9652A J9653A
E-MSM460 J9591A J9590A J9589A J9618A
E-MSM466 J9622A J9621A J9620A
Model WW USA Japan
MSM410 (E-MSM410) J9427A/B J9426A/B J9529A/B
MSM422 (E-MSM422) J9359A/B J9358A/B J9530A/B
MSM310 (E-MSM310) J9379A/B J9374A/B J9524A/B
MSM310-R (E-MSM310-R) J9383A/B J9380A/B
MSM320 (E-MSM320) J9364A/B J9360A/B J9527A/B
MSM320-R (E-MSM320-R) J9368A/B J9365A/B J9528A/B