Changing a DriveLock password
To access the DriveLock settings in Computer Setup, follow these steps:
1.
Open Computer Setup by turning on or restarting the computer, and then pressing
esc
while the
“Press the ESC key for Startup Menu” message is displayed in the lower-left corner of the screen.
2.
Press
f10
to enter BIOS Setup.
3.
Use the arrow keys to select
Security
>
DriveLock passwords
, and then press
enter
.
4.
Use the arrow keys to select the location of the internal hard drive, and then press
f10
.
5.
Use the arrow keys to select the field for the password you want to change. Type your current
password in the
Old password
field, and then type the new password in the
New password
field
and in the
Verify new password
field. Then press
f10
.
6.
To save your preferences, use the arrow keys to select
File
>
Save changes and exit
. Then follow
the instructions on the screen.
Your preferences go into effect when the computer restarts.
58
Chapter 5 Security
Summary of Contents for Mini
Page 1: ...HP Mini User Guide ...
Page 4: ...iv Safety warning notice ...
