manualshive.com logo in svg

HP Mini, User Manual

The HP Mini is a user-friendly and compact device designed to provide convenience on-the-go. Easily access its complete set of instructions and guidelines through a free user manual available for download from manualshive.com. Get the most out of your HP Mini with this comprehensive manual, ensuring a smooth and hassle-free experience.

Share
Download
background image

Component

Description

(1)

WWAN antennas (2)* (select models only)

Send and receive wireless signals to communicate with
wireless wide-area networks (WWANs).

(2)

WLAN antennas (2)* (select models only)

Send and receive wireless signals to communicate with
wireless local area networks (WLANs).

*The antennas are not visible from the outside of the computer. For optimal transmission, keep the areas immediately around
the antennas free from obstructions.

To see wireless regulatory notices, refer to the section of the 

Regulatory, Safety and Environmental

Notices

 that applies to your country or region. These notices are located in Help and Support.

10

Chapter 1   Features

Summary of Contents for Mini



































































































































Reviews:

No comments

Related manuals for Mini

Brands by name

Popular brands

Load more brands