Choosing MultiBoot preferences
You can use MultiBoot in the following ways:
●
To set a new boot order that the computer uses each time it is turned on, by changing the boot
order in Computer Setup.
●
To dynamically choose the boot device, by pressing
esc
while the “Press the ESC key for Startup
Menu” message is displayed at the bottom of the screen, and then pressing
f9
to enter the Boot
Device Options menu.
●
To use MultiBoot Express to set variable boot orders. This feature prompts you for a boot device
each time the computer is turned on or restarted.
Setting a new boot order in Computer Setup
To start Computer Setup and set a boot device order that the computer uses each time it is turned on
or restarted, follow these steps:
1.
Turn on or restart the computer, and then press
esc
while the “Press the ESC key for Startup Menu”
message is displayed at the bottom of the screen.
2.
Press
f10
to enter BIOS Setup.
3.
Use a pointing device or the arrow keys to select
System Configuration
>
Boot Options
. Confirm
that
Enabled
is selected next to
MultiBoot
.
NOTE:
MultiBoot is enabled at the factory.
4.
Use a pointing device or the arrow keys to select a device in the list.
5.
To move the device up in the boot order, use a pointing device to click the plus sign (+), or press
the
+
key.
– or –
To move the device down in the boot order, use a pointing device to click the minus sign (-), or
press the
-
key.
6.
To save your changes and exit Computer Setup, click
Save
in the lower-left corner of the screen,
and then follow the on-screen instructions.
– or –
Use the arrow keys to select
File
>
Save changes and exit
, and then press
enter
.
Your changes go into effect when the computer restarts.
Choosing MultiBoot preferences 105
Summary of Contents for Mini
Page 1: ...HP Mini User Guide ...
Page 4: ...iv Safety warning notice ...
