HP Mini User Manual Download Page 53

Page: 53 / 130

Component

Description

(1)

Webcam light

On: The webcam is in use.

(2)

Webcam

Records audio and video and captures still photographs.

(3)

Internal microphones (2)

Record sound.

(4)

Audio-in (microphone) jack

Connects an optional computer headset microphone, stereo array
microphone, or monaural microphone.

(5)

Audio-out (headphone) jack

Produces sound when connected to optional powered stereo
speakers, headphones, ear buds, or a headset.

WARNING!

To reduce the risk of personal injury, adjust the

volume before putting on headphones, earbuds, or a headset. For
additional safety information, refer to the

Regulatory, Safety and

Environmental Notices

NOTE:

When a device is connected to the headphone jack, the

computer speakers are disabled.

(6)

Speakers (2)

Produce sound.

Adjusting the volume

You can adjust the volume using the following controls:

●

Computer volume function keys—Either the

f10

, or

f11

key:

◦

To mute or restore volume, press

◦

To decrease volume, press

f10

Multimedia features

Summary of Contents for Mini



































































































































Search results

Summary of Contents for Mini

Reviews:

Related manuals for Mini

Brands by name

Popular brands

HP Mini, User Manual

Search results

Summary of Contents for Mini

Reviews:

Related manuals for Mini

Brands by name

Popular brands