HP HP ProCurve Series 6600, Access Security Manual

Page: 523 / 778

10-103
IPv4 Access Control Lists (ACLs)
Displaying ACL Configuration Data
Displaying the Content of a Specific ACL
This command displays a specific IPv6 or IPv4 ACL configured in the running
config file in an easy-to-read tabular format.
N o t e
This information also appears in the
show running
display. If you execute
write
memory
after configuring an ACL, it also appears in the
show config
display.
For information on IPv4 ACL operation, refer to the latest version of the Access
Security Guide for your switch.
For example, suppose you configured the following two ACLs in the switch:
Use
show access-list < identifier >
to inspect a specific IPv6 or IPv4 ACL, as
follows:
Syntax: show access-list < identifier > [config]
Display detailed information on the content of a specific ACL
configured in the running-config file.
Identifier Type Desired Action
Accounting IPv6 • Permit Telnet traffic from these two IPv6 addresses:
– 2001:db8:0:1af::10: 14
– 2001:db8:0:1af::10: 24
• Deny Telnet traffic from all other devices in the same subnet.
• Permit all other IPv6 traffic from the subnet.
• Deny and log any IPv6 traffic from any other source.
List-120 IPv4
Extended
• Permit any TCP traffic from 10.30.133.27 to any destination.
• Deny any other IPv4 traffic from 10.30.133.(1-255).
• Permit all other IPv4 traffic from any source to any destination.