HP HP ProCurve Series 6600, Access Security Manual

Page: 43 / 778

1-9
Security Overview
Getting Started with Access Security
Getting Started with Access Security
HP switches are designed as “plug and play” devices, allowing quick and easy
installation in your network. In its default configuration the switch is open to
unauthorized access of various types. When preparing the switch for network
operation, therefore, HP strongly recommends that you enforce a security
policy to help ensure that the ease in getting started is not used by
unauthorized persons as an opportunity for access and possible malicious
actions.
Since security incidents can originate with sources inside as well as outside
of an organization, your access security provisions must protect against
internal and external threats while preserving the necessary network access
for authorized clients and users. It is important to evaluate the level of
management access vulnerability existing in your network and take steps to
ensure that all reasonable security precautions are in place. This includes both
configurable security options and physical access to the switch.
Switch management access is available through the following methods:
■
Front panel access to the console serial port (see “Physical Security”)
■ Inbound Telnet access
■
Web-browser access (WebAgent)
■ SNMP access
For guidelines on locking down your switch for remote management access,
see “Quick Start: Using the Management Interface Wizard” on page 1-10.
Physical Security
Physical access to the switch allows the following:
■ use of the console serial port (CLI and Menu interface) for viewing and
changing the current configuration and for reading status, statistics, and
log messages.
■ use of the switch’s USB port for file transfers and autorun capabilities.
■ use of the switch’s Clear and Reset buttons for these actions:
• clearing (removing) local password protection
• rebooting the switch
• restoring the switch to the factory default configuration (and erasing
any non-default configuration settings)