manualshive.com logo in svg

HP HP ProCurve Series 6600, Access Security Manual

Share
Download
HP HP ProCurve Series 6600 Access Security Manual Download Page 619

13-7

Configuring Port-Based and User-Based Access Control (802.1X)

Terminology

designate as the Unauthorized-Client VLAN.) A port configured to use a 
given Unauthorized-Client VLAN does not have to be statically configured 
as a member of that VLAN as long as at least one other port on the switch 
is statically configured as a tagged or untagged member of the same 
Unauthorized-Client VLAN. An unauthorized-client VLAN is available on 
a port only if there is no authenticated client already using the port. 

Untagged Membership in a VLAN:

 A port can be an untagged member of 

only one VLAN (unless MAC-based VLANs are enabled. Please see “MAC-
Based VLANs” on page 6-51). (In the factory-default configuration, all 
ports on the switch are untagged members of the default VLAN.) An 
untagged VLAN membership is 

required

 for a client that does not support 

802.1q VLAN tagging. A port can simultaneously have one untagged VLAN 
membership and multiple tagged VLAN memberships. Depending on how 
you configure 802.1X Open VLAN mode for a port, a statically configured, 
untagged VLAN membership may become unavailable while there is a 
client session on the port. See also “

Tagged Membership in a VLAN

”.

Summary of Contents for HP ProCurve Series 6600











































































































































































































































































































































































































































































































































































































































































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands