manualshive.com logo in svg

HP HP ProCurve Series 6600, Access Security Manual, Page: 326 / 778

Share
Download
HP HP ProCurve Series 6600 Access Security Manual Download Page 326

7-8

Configuring RADIUS Server Support for Switch Services

RADIUS Server Configuration for CoS (802.1p Priority) and Rate-Limiting

For example, suppose port 4 has been statically configured from the CLI with 
the following:

■

802.1p priority: 7

■

inbound rate-limit: 50 percent

■

outbound rate-limit: 50 percent

The above, statically configured, per-port priority and inbound rate-limit 
settings will not apply to any clients who authenticate and receive different 
inbound priority and rate-limit settings from the RADIUS server. If the RADIUS 
server also assigns an outbound rate-limit setting, which is applied per-port 
instead of per-client, then the outbound traffic from the port to all connected 
clients will be rate-limited according to the value set by the server for the most 
recently authenticated client. Thus, if client “X” authenticates with Web-Auth 
on port 4 with a RADIUS server that assigns a priority of 3, an inbound rate-
limit of 10,000 kbps, and an outbound rate-limit of 50,000 kbps, then:

■

The inbound traffic from client “X” will be subject to a priority of 3 
and inbound rate-limit of 10,000 kbps. Traffic from other clients using 
the port will not be affected by these values.

■

The combined rate-limit outbound for all clients using the port will 
be 50,000 kbps until either all client sessions end or another client 
authenticates and receives a different outbound rate-limit. 

web-based

 

[ 

port-list

 ] clients detail

 

displays, for a Web authen-

ticated client (Web-Auth), the status of RADIUS-assignment 
details for that client.. (Refer to “Show Commands for Web 
Authentication” on page 4-26.) 

mac-based

 

[ 

port-list

 ] clients detail

 

displays, for a MAC authen-

ticated client (MAC-Auth), the status of RADIUS-assignment 
details for that client.  (Refer to “Show Commands for MAC-
Based Authentication” on page 4-65.) 

authenticator

 

[ 

port-list

 ] clients detail

 

displays, for an 802.1X- 

authenticated client, the status of RADIUS-assignment 
details for that client.. (Refer to “Show Commands for Port-
Access Authenticator” on page 13-55.) 

Summary of Contents for HP ProCurve Series 6600











































































































































































































































































































































































































































































































































































































































































































































































































Reviews:

No comments