manualshive.com logo in svg

HP HP ProCurve Series 6600, Access Security Manual

Share
Download
HP HP ProCurve Series 6600 Access Security Manual Download Page 722

14-32

Configuring and Monitoring Port Security     
MAC Lockout

MAC Lockout

MAC Lockout involves configuring a MAC address on all ports and VLANs for 
a switch so that any traffic to or from the “locked-out” MAC address will be 
dropped. This means that all data packets addressed to or from the given 
address are stopped by the switch. MAC Lockout is implemented on a per 
switch assignment.

You can think of MAC Lockout as a simple blacklist. The MAC address is 
locked out on the switch and on all VLANs. No data goes out or in from the 
blacklisted MAC address to a switch using MAC Lockout.

To fully lock out a MAC address from the network it would be necessary to 
use the MAC Lockout command on all switches.

To use MAC Lockout you must first know the MAC Address you wish to block.

How It Works.

 Let’s say a customer knows there are unauthorized wireless 

clients who should not have access to the network. The network administrator 
“locks out” the MAC addresses for the wireless clients by using the MAC 
Lockout command (

lockout-mac <

mac-address

>

). When the wireless clients 

then attempt to use the network, the switch recognizes the intruding MAC 
addresses and prevents them from sending or receiving data on that network.

If a particular MAC address can be identified as unwanted on the switch then 
that MAC Address can be disallowed on all ports on that switch with a single 
command. You don’t have to configure every single port—just perform the 
command on the switch and it is effective for all ports.

Syntax:

[no] lockout-mac < 

mac-address

 >

Summary of Contents for HP ProCurve Series 6600











































































































































































































































































































































































































































































































































































































































































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands