manualshive.com logo in svg

HP HP ProCurve Series 6600, Access Security Manual

Share
Download
HP HP ProCurve Series 6600 Access Security Manual Download Page 321

7-3

Configuring RADIUS Server Support for Switch Services

RADIUS Server Configuration for CoS (802.1p Priority) and Rate-Limiting

RADIUS Server Configuration for CoS
(802.1p Priority) and Rate-Limiting

This section provides general guidelines for configuring RADIUS servers to 
dynamically apply the features listed in table 7-2 on ports supporting authen-
ticated clients:

Table 7-2.

Cos and Rate-Limiting Services 

Service

Control Method and Operating Notes:

802.1p (CoS) Priority 
Assignments Per-
User on Traffic 
Inbound to the Switch

Assigns a RADIUS-
configured 802.1p 
priority to the inbound 
packets received from 
a specific client 
authenticated on a 
switch port.

Note:

 Beginning with 

software release 
K.14.01, this attribute 
is assigned per-
authenticated-user 
instead of per-port.

Standard Attribute

 used in the RADIUS server: 59 

(This is the preferred attribute for new or updated configurations.)

Vendor-Specific Attribute

 used in the RADIUS server.

(This attribute is maintained for legacy configurations.)
HP vendor-specific ID:11
VSA: 40  

Setting:

 User-Priority-Table = 

xxxxxxxx

 where: 

     x

 = desired 802.1p priority

Note:

 This is an eight-digit field. Enter the same 

x

-value for all eight 

digits.

Requires a port-access authentication method (802.1X, Web Auth, or 
MAC Auth) configured on the client’s port on the switch. 
For more on 802.1p priority levels, refer to the section titled 
“Overview” in the “Quality of Service (QoS)” chapter of the latest 

Advanced Traffic Management Guide

 for your switch.

Summary of Contents for HP ProCurve Series 6600











































































































































































































































































































































































































































































































































































































































































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands