HP HP ProCurve Series 6600, Access Security Manual

Page: 668 / 778

13-56
Configuring Port-Based and User-Based Access Control (802.1X)
Displaying 802.1X Configuration, Statistics, and Counters
Syntax: show port-access authenticator [ port-list ]
[config | statistics | session-counters | vlan | clients | clients detailed
—Continued—
•
Untagged VLAN
: VLAN ID number of the untagged VLAN
used in client sessions. If the switch supports MAC-based
(untagged) VLANs,
MACbased is displayed to show that
multiple untagged VLANs are configured for
authentication sessions.
•
Tagged VLANs
: Are tagged VLANs (statically configured or
RADIUS-assigned) used for authenticated clients?
Yes
or
No
•
Port COS
:
Yes -
Client-specific CoS (Class of Service) values are
applied to more than one authenticated client on the port.
No - No client-specific CoS values are applied to any
authenticated client on the port.
<
cos-value >- Numerical value of the CoS (802.1p
priority) applied to inbound traffic from one
authenticated client. For client-specific per-port CoS
values, enter the
show port-access web-based clients detailed
command.
•
% In Limit
: Inbound rate limit applied.
•
RADIUS ACL
: Are RADIUS-assigned ACLs used for
authenticated clients?
Yes
or
No
•
Cntrl Dir:
Directions in which flow of incoming and
outgoing traffic is blocked on 802.1X-aware port that has
not yet entered the authenticated state:
Both: Incoming and outgoing traffic is blocked on port until
authentication occurs.
In: Only incoming traffic is blocked on port before
authentication occurs. Outgoing traffic with unknown
destination addresses is flooded on the unauthenticated
802.1X-aware port.