manualshive.com logo in svg

HP HP ProCurve Series 6600, Access Security Manual

Share
Download
HP HP ProCurve Series 6600 Access Security Manual Download Page 353

7-35

Configuring RADIUS Server Support for Switch Services

Configuring and Using Dynamic (RADIUS-Assigned) Access Control Lists

Configuration Notes

Explicitly Permit IPv4 and IPv6 Traffic From an Authenticated 
Client.  

This option for ending a RADIUS-assigned ACL permits all of the 

client’s inbound IPv4 and IPv6 traffic not previously permitted or denied.

Nas-filter-Rule += permit in ip from any to any
HP-Nas-Rules-IPv6 = 1

(Refer to table 7-7 on page 7-24 for information on the above attributes.) 

Explicitly Permit Only the IPv4 Traffic From an Authenticated Client.  

Any of the following three options for ending a RADIUS-assigned ACL explic-
itly permit all of the client’s inbound IPv4 traffic not previously permitted or 
denied. These options also deny any of the client’s IPv6 traffic not previously 
permitted or denied.

■

Nas-filter-Rule += permit in ip from any to any

(Using this attribute to permit IPv4 traffic from the client while denying 
any IPv6 traffic from the client assumes that 

HP-Nas-Rules-IPv6 = 1

 

does not 

exist elsewhere in the ACL. Refer to table 7-7 on page 7-24 for more on 

HP-Nas-Rules-IPv6.

)

■

HP-Nas-Filter-Rule += permit in ip from any to any

■

Nas-filter-Rule += permit in ip from any to any

HP-Nas-Rules-IPv6 = 2

Explicitly Denying Inbound Traffic From an Authenticated Client.  

Any of the following three options for ending a RADIUS-assigned ACL explic-
itly deny all of the client’s inbound IPv4 and IPv6 traffic not previously 
permitted or denied. 

■

Nas-filter-Rule += deny in ip from any to any

■

HP-Nas-Filter-Rule += deny in ip from any to any

■

Nas-filter-Rule += deny in ip from any to any

HP-Nas-Rules-IPv6 = 2

Implicitly Denying Any IP Traffic.  

For any packet being filtered by a 

RADIUS-assigned ACL, there will always be a match. That is, any packet that 
does not have a match with an explicit permit or deny ACE in the list will 
match with the implicit “deny any any” ACE automatically included at the end 
of the ACL. That is, a RADIUS-assigned ACL includes an implicit 

deny in ip from 

any to any

 ACE at the end of the ACL to deny any IPv4 and IPv6 traffic not 

previously permitted or denied. 

Summary of Contents for HP ProCurve Series 6600











































































































































































































































































































































































































































































































































































































































































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands