manualshive.com logo in svg

HP HP ProCurve Series 6600, Access Security Manual

Share
Download
HP HP ProCurve Series 6600 Access Security Manual Download Page 92

2-38

Configuring Username and Password Security

Front-Panel Security

•

Modify the operation of the Reset+Clear combination (page 2-36) so 
that the switch still reboots, but does 

not

 restore the switch’s factory 

default configuration settings. (Use of the Reset button alone, to 
simply reboot the switch, is not affected.) 

•

Disable or re-enable Password Recovery.

Syntax:

show front-panel-security

Displays the current front-panel-security settings:

Clear Password:

  

Shows the status of the Clear button on the 

front panel of the switch.

 

Enabled

 

means that pressing the 

Clear button erases the local usernames and passwords 
configured on the switch (and thus removes local password 
protection from the switch).

 

Disabled

 

means that pressing the 

Clear button does not remove the local usernames and 
passwords configured on the switch. (Default:

 

Enabled

.)

Reset-on-clear:

 Shows the status of the reset-on-clear option 

(

Enabled

 or 

Disabled

). When reset-on-clear is disabled and 

Clear Password is enabled, then pressing the Clear button 
erases the local usernames and passwords from the switch. 
When reset-on-clear is enabled, pressing the Clear button 
erases the local usernames and passwords from the switch 
and reboots the switch. (Enabling 

reset-on-clear

 

automatically enables 

clear-password

.) (Default: 

Disabled

.)

Note:

 

If you have stored security credentials (including the 

local manager and operator usernames and passwords) to the 
running config file by entering the 

include-credentials

 

command, the 

Reset-on-clear

 option is ignored. If you press 

the Clear button on the front panel, the manager and operator 
usernames and passwords are deleted from the startup 
configuration file, but the switch does not reboot. For more 
information about storing security credentials, see “Saving 
Security Credentials in a Config File” on page 2-11 in this 
guide.

Factory Reset:

 

Shows the status of the System Reset button on 

the front panel of the switch. Enabled means that pressing the 
System Reset button reboots the switch and also enables the 
System Reset button to be used with the Clear button (page 
2-36) to reset the switch to its factory-default configuration. 
(Default:

 

Enabled

.)

Summary of Contents for HP ProCurve Series 6600











































































































































































































































































































































































































































































































































































































































































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands