38
Figure 30 Setting the daylight saving time
System time configuration example
Network requirements
As shown in
:
•
The local clock of Device A is set as the reference clock.
•
Switch B operates in client mode, and uses Device A as the NTP server.
Configure NTP authentication on Device A and Switch B so that Switch B is to be synchronized to
Device A.
Figure 31 Network diagram
Configuring the system time
1.
Configure the local clock as the reference clock, with the stratum of 2. Enable NTP
authentication, set the key ID to
24
, and specify the created authentication key
aNiceKey
as a
trusted key. (Details not shown.)
2.
On Switch B, configure Device A as the NTP server:
a.
Select
Device
>
System Time
from the navigation tree.
b.
Click the
Network Time Protocol
tab.
c.
Enter
24
in the
ID
field, enter
aNiceKey
in the
Key String
field for key 1, enter
1.0.1.11
in
the
NTP Server 1
field, and enter
24
in the
Reference Key ID
field.
d.
Click
Apply
.
Summary of Contents for FlexNetwork NJ5000
