422
ACL and QoS configuration example
Network requirements
As shown in
, the FTP server (10.1.1.1/24) is connected to the Switch, and the clients
access the FTP server through GigabitEthernet 1/0/1 of the Switch.
Configure an ACL and a QoS policy as follows to prevent the hosts from accessing the FTP server
from 8:00 to 18:00 every day:
1.
Add an ACL to prohibit the hosts from accessing the FTP server from 8:00 to 18:00 every day.
2.
Configure a QoS policy to drop the packets matching the ACL.
3.
Apply the QoS policy in the inbound direction of GigabitEthernet 1/0/1.
Figure 460 Network diagram
Configuring Switch
1.
Define a time range to cover the time range from 8:00 to 18:00 every day:
a.
Select
QoS
>
Time Range
from the navigation tree.
b.
Click the
Add
tab.
c.
Enter the time range name
test-time
.
d.
Select the
Periodic Time Range
box.
e.
Set the
Start Time
to 8:00 and the
End Time
to 18:00.
f.
Select the options
Sun
through
Sat
.
g.
Click
Apply
.
Summary of Contents for FlexNetwork NJ5000
