HP FlexNetwork NJ5000, User Manual

Page: 32 / 475

20
Table 10 Commands for features peculiar to the HPE FlexNetwork NJ5000 5G PoE+ Walljack
Switch
Command Task
manage-mode on
undo manage-mode on
Set the device operating mode to management or
unmanagement.
poe force-power gigabitethernet
interface-number1 power1 gigabitethernet
interface-number2 power2
Forcibly allocate power to a pair of PoE interfaces (PIs).
poe legacy enable
undo poe legacy enable
Enable or disable PD compatibility check.
manage-mode
Use
manage-mode on
to enable the device to operate in management mode.
Use
undo manage-mode on
to set the device operating mode to unmanagement.
Syntax
manage-mode on
undo manage-mode on
Default
The HPE NJ5000 5G PoE+ switch operates in management mode.
Views
System view
Default command level
2: System level
Usage guidelines
In management mode, you can assign an IP address to the device. The device is manageable from
the Web interface or CLI.
In unmanagement mode, you can manage the device only from the console port.
Examples
# Enable the device to operate in management mode.
<Sysname> system-view
System View: return to User View with Ctrl+Z.
[Sysname] manage-mode on
poe force-power
Use
poe force-power
to forcibly allocate power to a pair of PIs.
Use
undo poe force-power
to remove power allocation to a pair of PIs.
Syntax
poe force-power gigabitethernet interface-number1 power1 gigabitethernet interface-number2
power2
undo poe force-power