ForcePad (Touchpad)
Description
Spare part number
ForcePad (Touchpad) (includes cable)
790066-001
Before removing the ForcePad, follow these steps:
1.
Turn off the computer. If you are unsure whether the computer is off or in Hibernation, turn the
computer on, and then shut it down through the operating system.
2.
Disconnect the power from the computer by unplugging the power cord from the computer.
3.
Disconnect all external devices from the computer.
4.
Remove the bottom cover (see
Bottom cover on page 32
).
5.
Remove the battery (see
Battery on page 56
).
Remove the ForcePad:
1.
Disconnect the ForcePad cable
(1)
from the system board.
2.
Disconnect the NFC module antenna cable
(2)
from the ForcePad.
3.
Remove the four Phillips PM2.0×2.0 broadhead screws
(3)
that secure the ForcePad to the computer,
and then lift the ForcePad from the computer
(4)
.
Reverse the removal procedures to install the ForcePad.
Component replacement procedures
59
