2.
Remove the two Phillips PM2.5×5.2 screws
(1)
that secure the bracket on the left side of the computer,
and the remove the bracket
(2)
.
The display brackets are available in the Bracket Kit using spare part number 800582-001.
3.
Remove the cable from the routing clips in the right display bracket
(1)
.
4.
Remove the two Phillips PM2.5×3.4 screws
(2)
that secure the display bracket to the right side of the
computer, and then remove the bracket
(3)
.
The display brackets are available in the Bracket Kit using spare part number 800582-001.
5.
Disconnect the display cable from the system board
(1)
.
6.
Remove the WLAN antenna from the clips and routing path built into the computer
(2)
.
7.
Disconnect the webcam cable from the system board
(3)
.
8.
Remove the three Phillips PM2.5×4.0 screws
(4)
that secure the display to the computer.
46
Chapter 5 Removal and replacement procedures for Authorized Service Provider parts
