HP DL360 - ProLiant - Photon, Reference And Troubleshooting Manual

Page: 143 / 246

Troubleshooting 143
•
An administrative user account on each target system. The administrative
account must have the same username and password as the local
administrative client system.
•
All target systems are connected to the same network and use protocols that
enable them to be seen from the administrative client.
•
Each target system has a system partition that is at least 32 MB in size.
•
Verification that the ROM version to which you are upgrading can be used
for all the servers or array controllers that you are upgrading.
•
Follow the instructions for the Remote ROM Flash procedure that
accompany the software.
Command-line syntax error
If the correct command-line syntax is not used, an error message describing the
incorrect syntax is displayed and the program exits. Correct the syntax, and then
restart the process.
Invalid or incorrect command-line parameters
If incorrect parameters are passed into command-line options, an error message
describing the invalid or incorrect parameter is displayed and the program exits
(Example: Invalid source path for system configuration or ROMPaq files).
Correct the invalid parameter, and then restart the process.
Access denied on target computer
If you specify a networked target computer for which you do not have
administrative privileges, an error message is displayed describing the problem,
and then the program exits. Obtain administrative privileges for the target
computer, and then restart the process. Be sure the remote registry service is
running on a Windows®-based system.