manualshive.com logo in svg

HP DL360 - ProLiant - Photon, Reference And Troubleshooting Manual

Download the free deployment manual for the HP DL360 ProLiant Photon, a groundbreaking product that combines cutting-edge technology with exceptional performance. Unlock the full potential of this server by accessing the comprehensive manual, available for instant download from our website.

Share
Download
background image

 Troubleshooting 

119 

 

 
  
  

 

 

4.  Be sure no POST error messages ("POST Error Messages and Beep Codes" 

on page 

186

) are displayed while booting the server that indicate temperature 

violation or fan failure information. Refer to the server documentation for the 
temperature requirements for the server. 

5.  Access the IML to see if any event list error messages (on page 

216

) are 

listed relating to fans. 

6.  Replace any required non-functioning fans and restart the server. Refer to the 

server documentation for specifications on fan requirements. 

7.  Be sure all fan slots have fans or blanks installed. Refer to the server 

documentation for requirements. 

8.  Verify the fan airflow path is not blocked by cables or other material. 

 

 

Hot-plug fan problems are occurring 

Action: 

1.  Check the LEDs to be sure the hot-plug fans are working. Refer to the server 

documentation for LED information. 

NOTE:  For servers with redundant fans, backup fans may spin up 
periodically to test functionality. This is part of normal redundant fan 
operation. 

2.  Be sure no POST error messages ("POST Error Messages and Beep Codes" 

on page 

186

) are displayed. 

3.  Be sure hot-plug fan requirements are being met. Refer to the server 

documentation. 

 

Hard Drive Problems 

List of Problems: 

System completes POST but hard drive fails .............................................................................

120

Hard drive is not recognized by the server .................................................................................

120

You are unable to access data.....................................................................................................

120

Server response time is slower than usual ..................................................................................

121

No hard drives are recognized ....................................................................................................

121

A new hard drive is not recognized ............................................................................................

121

Summary of Contents for DL360 - ProLiant - Photon























































































































































































































































Reviews:

No comments

Related manuals for DL360 - ProLiant - Photon

Paradyne 3100 Series Quick Installation preview
3100 Series
Brand: Paradyne Pages: 2
IBM ThinkPad i Series User Manual preview
ThinkPad i Series
Brand: IBM Pages: 82
j5 create JUH450 User Manual preview
JUH450
Brand: j5 create Pages: 7
Belkin POWERLINE AV Quick Installation Manual preview
POWERLINE AV
Brand: Belkin Pages: 2
P.I. Engineering Y–mouse Product Manual preview
Y–mouse
Brand: P.I. Engineering Pages: 4
National Instruments NI 6584R User Manual And Specifications preview
NI 6584R
Brand: National Instruments Pages: 20
Rocstor Y10A218-B1 User Manual preview
Y10A218-B1
Brand: Rocstor Pages: 2
Targus APA803 User Manual preview
APA803
Brand: Targus Pages: 87
Qlogic SANblade QLA2300 Installation Manual preview
SANblade QLA2300
Brand: Qlogic Pages: 30
LSI LSISAS3041E User Manual preview
LSISAS3041E
Brand: LSI Pages: 46
TP-Link TL-PA7010P Quick Installation Manual preview
TL-PA7010P
Brand: TP-Link Pages: 2
Black Box Twinax Baluns Manual preview
Twinax Baluns
Brand: Black Box Pages: 2
Elnec DIL32/PLCC32 ZIF-CS Manual preview
DIL32/PLCC32 ZIF-CS
Brand: Elnec Pages: 2
Tektronix P7600 Series Instructions preview
P7600 Series
Brand: Tektronix Pages: 2
LevelOne WUA-0603 Specifications preview
WUA-0603
Brand: LevelOne Pages: 3
LevelOne WPC-0600 Quick Installation Manual preview
WPC-0600
Brand: LevelOne Pages: 62
LevelOne USB-0301 Quick Installation Manual preview
USB-0301
Brand: LevelOne Pages: 2
Grandstream Networks HT702 Quick Start Manual preview
HT702
Brand: Grandstream Networks Pages: 4

Brands by name

Popular brands

Load more brands