manualshive.com logo in svg

HP DL360 - ProLiant - Photon, Reference And Troubleshooting Manual

Download the free deployment manual for the HP DL360 ProLiant Photon, a groundbreaking product that combines cutting-edge technology with exceptional performance. Unlock the full potential of this server by accessing the comprehensive manual, available for instant download from our website.

Share
Download
background image

178 

 HP ProLiant DL360 Generation 4 Server Reference and Troubleshooting Guide 

 

Description: A power supply in the external storage unit has failed. 

Action: Replace the power supply. 

 

Storage Enclosure on SCSI Bus X Indicated an Overheated Condition... 

...SOLUTION: Make sure all cooling fans are operating properly. Also be sure the 
operating environment of storage enclosure is within temperature specifications.  

Description: The external storage unit is generating a temperature alert. 

Action: 

1.  Be sure all fans are connected and operating properly. 

2.  Be sure the operating environment of the storage unit is within specifications. 

3.  For better airflow, remove any dust buildup from fans or other areas. 

4.  Check the server documentation for allowable temperature specifications and 

additional tips. 

5.  If the problem persists, replace the fan. 

 

Storage Enclosure on SCSI Bus X is Unsupported with its Current Firmware 
Version... 

...SOLUTION: Upgrade the firmware version on the storage enclosure.   

Description: The firmware version of the external storage unit is not supported. 

Action: Upgrade the firmware. 

 

Storage Enclosure on SCSI Bus X Indicated that the Fan Failed... 

...SOLUTION: Replace the fan.  

Description: The cooling fan located in the external storage unit has failed. 

Action: Replace the fan. 

 

 
  
  

Summary of Contents for DL360 - ProLiant - Photon























































































































































































































































Reviews:

No comments

Related manuals for DL360 - ProLiant - Photon

3Com OfficeConnect 3CRWE254G72 Installation Steps preview
OfficeConnect 3CRWE254G72
Brand: 3Com Pages: 1
D-Link DCF-650W - Air Wireless CompactFlash Cf 802.11B... User Manual preview
DCF-650W - Air Wireless CompactFlash Cf 802.11B...
Brand: D-Link Pages: 28
StarTech.com USB External Sound Card Adapter Instruction Manual preview
USB External Sound Card Adapter
Brand: StarTech.com Pages: 9
Radio Shack 273-1825 Owner'S Manual preview
273-1825
Brand: Radio Shack Pages: 36
Aiphone GHW-LC Installation And Operation Manual preview
GHW-LC
Brand: Aiphone Pages: 12
Planet ENW-9604 Quick Installation Manual preview
ENW-9604
Brand: Planet Pages: 2
HQ EL-ES04HQ Manual preview
EL-ES04HQ
Brand: HQ Pages: 37
HQ P.SUP.USB300 User Manual preview
P.SUP.USB300
Brand: HQ Pages: 20
Mesa 4I64 Info Sheet preview
4I64
Brand: Mesa Pages: 2
TRENDnet TEW-226PC Quick Installation Manual preview
TEW-226PC
Brand: TRENDnet Pages: 11
Lindy 41027 User Manual preview
41027
Brand: Lindy Pages: 2
Hama Wireless LAN Game Adapter W11 Operating Instructions preview
Wireless LAN Game Adapter W11
Brand: Hama Pages: 4
Aztech HL117E Easy Start Manual preview
HL117E
Brand: Aztech Pages: 2
EKT BT5701 Quick Start Manual preview
BT5701
Brand: EKT Pages: 3
Qlogic QLA234 Series Quick Start Manual preview
QLA234 Series
Brand: Qlogic Pages: 82
Asante Desktop EN/SC User Manual preview
Desktop EN/SC
Brand: Asante Pages: 29
Sony VAD-WF Operating Instructions preview
VAD-WF
Brand: Sony Pages: 2
Sony XLR-K3M Help Manual preview
XLR-K3M
Brand: Sony Pages: 26

Brands by name

Popular brands

Load more brands