manualshive.com logo in svg

HP DL360 - ProLiant - Photon, Reference And Troubleshooting Manual

Download the free deployment manual for the HP DL360 ProLiant Photon, a groundbreaking product that combines cutting-edge technology with exceptional performance. Unlock the full potential of this server by accessing the comprehensive manual, available for instant download from our website.

Share
Download
background image

 Troubleshooting 

173 

 

No Configuration for Array Accelerator Board 

Description: The array accelerator board has not been configured. 

Action: If the array accelerator board is present, run ACU to configure the board. 

 

NVRAM Configuration Present, Controller not Detected 

Description: EISA NVRAM has a configuration for an array controller, but no 
board exists in this slot. Either a board has been removed from the system or a 
board has been placed in the wrong slot. 

Action: Place the array controller in the proper slot, or run the server setup utility 
to reconfigure NVRAM to reflect the removal or new position. 

 

One or More Drives is Unable to Support Redundant Controller Operation 

Description: At least one drive in use does not support redundant controller 
operation. 

Action: Replace the drive that does not support redundant controller operation. 

 

Other Controller Indicates Different Hardware Model 

Description: The other controller in the redundant controller configuration is a 
different hardware model. 

Action: Be sure both controllers are using the same hardware model. If they are, 
make sure the controllers are fully seated in their slots. 

 

Other Controller Indicates Different Firmware Version 

Description: The other controller in the redundant controller configuration is 
using a different firmware version. 

Action: Be sure both controllers are using the same firmware revision. 

 

 
  
  

 

Summary of Contents for DL360 - ProLiant - Photon























































































































































































































































Reviews:

No comments

Related manuals for DL360 - ProLiant - Photon

Mercusys MW300UH Quick Installation Manual preview
MW300UH
Brand: Mercusys Pages: 59
Bose SoundTouch 120 Quick Start Manual preview
SoundTouch 120
Brand: Bose Pages: 2
HomeSpot NS003P Manual preview
NS003P
Brand: HomeSpot Pages: 12
NI SA-413T Manual preview
SA-413T
Brand: NI Pages: 11
Audio Partnership WD752-BD-N User Manual preview
WD752-BD-N
Brand: Audio Partnership Pages: 46
Toto Link A2000UA Quick Installation Manual preview
A2000UA
Brand: Toto Link Pages: 1
Bose Lifestyle 525 Series II Home Theater Setup Manual preview
Lifestyle 525 Series II Home Theater
Brand: Bose Pages: 67
Sercomm UB811Rn User Manual preview
UB811Rn
Brand: Sercomm Pages: 24
Moeller Xcomfort CSAP-01/0 Series Assembly Instructions preview
Xcomfort CSAP-01/0 Series
Brand: Moeller Pages: 4
Lenze DIAG E94AZCUS Mounting Instructions preview
DIAG E94AZCUS
Brand: Lenze Pages: 3
Panasonic et-adser Specifications preview
et-adser
Brand: Panasonic Pages: 1
Panasonic ET-UW100 Brochure & Specs preview
ET-UW100
Brand: Panasonic Pages: 2
Panasonic DMW-USBC1 Operating Instructions preview
DMW-USBC1
Brand: Panasonic Pages: 2
Panasonic CYZAC50N Operating Instructions preview
CYZAC50N
Brand: Panasonic Pages: 2
Panasonic DBUB-P207 User Manual preview
DBUB-P207
Brand: Panasonic Pages: 5
Panasonic DBUB-P705 User Manual preview
DBUB-P705
Brand: Panasonic Pages: 6
Panasonic CF-AA6503A2 Operating Instructions Manual preview
CF-AA6503A2
Brand: Panasonic Pages: 6
Panasonic DE-852D Operating Instructions Manual preview
DE-852D
Brand: Panasonic Pages: 8

Brands by name

Popular brands

Load more brands