3.
Use the supplied power cords to connect the Capacity Upgrade Kit to the mains power supply.
2. IN connector
1. Power connectors
4. Port 2E connector
3. Power on/off button
4.
Power on the Capacity Upgrade Kit. You may need to hold down the power on button for a few
seconds.
Applying the LTU
To increase the capacity of your D2D4112 with the Capacity Upgrade Kit you must first obtain a
permanent License To Use (LTU) from the HP Licensing website and then use the HP D2D’s Web
Management Interface to apply the LTU, activate the additional capacity and complete the licensing
process. Go to the HP Licensing website at
http://www.webware.hp.com
and follow the instructions
to obtain the LTU. You will also find instructions in the License pack.
To apply the LTU:
1.
Log on to the Web Management Interface and select the
Licenses
web page from
Settings
.
2.
If you have saved the LTU as a .DAT file, click
Upload license file
and use the
Browse
option to
locate the file. Click
Upload
.
If you used email or a temporary file, cut and paste the string exactly as you obtained it from the
HP Licensing website and click
Enter LTU string
. It is not advised to try and key in the LTU manually.
Capacity Upgrade
200
Summary of Contents for D2D
