manualshive.com logo in svg

HP D2D, User Manual, Page: 133 / 210

Share
Download
HP D2D User Manual Download Page 133

Local library

This section contains a list of all available local libraries. Local Libraries are the libraries that have
been configured on this HP D2D.

•

Non-replicating library:

 a library on the HP D2D Backup System whose slots have not yet been

mapped for replication. Replication and Recovering Wizards are available only with non-replicating
libraries.

•

Replication-Source library: 

a library on the HP D2D Backup System with cartridges that have been

mapped for replication. You do not have to map all cartridges in a Replication-Source Library and
the Replication-Target Library does not have to contain the same number of cartridges as the
Replication-Source Library.

•

Replication-Target library:

 a library on the HP D2D Backup System with slots that hold cartridges

replicated from a Replication-Source library. The option is available to recover individual cartridges
from Replication-Target libraries.

Table 12 Local library parameters

The name of the library, defined when the library device was created.

Library Name

The role, which may be non-replicating, replication-source or replication-target.
All library devices are initially non-replicating, until slots have been configured
using this page.

Role

The number of slots that have been mapped.

Mapped Slots

The total number of slots configured on the library device.

Total Slots

The version number of the library.

Version

D2D Backup System HP D2D4112

133

Summary of Contents for D2D



















































































































































































































Reviews:

No comments