HP Compaq NX7300 Maintenance And Service Manual Download

Page: 44 / 242

Troubleshooting

Maintenance and Service Guide

2–17

Flowchart 2.7—No Video, Part 2

Continued from

“Flowchart

2.6—No Video,

Part 1.”

Done

Adjust external

monitor display.

Video OK?

Adjust

display

brightness.

Video OK?

Done

Check that computer is properly

seated in docking device, for

bent pins on cable, and for

monitor connection.

Go to “A” in

“Flowchart

2.6—No Video,

Part 1.”

Check brightness

of external

monitor.

Try another

external
monitor.

Internal

and external

video OK?

Go to

“Flowchart

2.8—Nonfunctioning

Docking Device (if

applicable).”

Remove

computer from

docking device,

if connected.

Summary of Contents for Compaq NX7300



















































































































































































































































Search results

Summary of Contents for Compaq NX7300

Reviews:

Related manuals for Compaq NX7300

Brands by name

Popular brands

HP Compaq NX7300, Maintenance And Service Manual

Search results

Summary of Contents for Compaq NX7300

Reviews:

Related manuals for Compaq NX7300

Brands by name

Popular brands