manualshive.com logo in svg

HP Compaq NX7300, Maintenance And Service Manual

Share
Download
HP Compaq NX7300 Maintenance And Service Manual Download Page 36

Troubleshooting

Maintenance and Service Guide

2–9

Device configurations 
(

continued)

■

Choose Bit-shift or LBA assisted HDD Translation 
Mode.

■

Enable/disable Windows direct application 
launcher.

■

Enable/disable HP Lockout.

Built-In Device Options

■

Enable/disable embedded WWAN Device Radio.

■

Enable/disable embedded WLAN Device Radio

■

Enable/disable embedded Bluetooth

®

 Device 

Radio.

■

Enable/disable LAN/WLAN Switching. When 
enabled, switches to a WLAN when a LAN is 
either unavailable or disconnected.

■

Enable/disable Wake on LAN from Off.

■

Enable/disable the ambient light sensor.

Port Options

■

Enable/disable the serial port.

■

Enable/disable the parallel port.

■

Enable/disable the flash media reader.

■

Enable/disable the USB port.

Ä

Disabling the USB port also disables MultiBay 
devices and ExpressCard devices on the 
advanced port replicator.

■

Enable/disable the 1394 port.

■

Enable/disable the cardbus slot.

■

Enable/disable the ExpressCard slot.

■

Enable/disable the infrared port.

■

Enable/disable the optical disk drive.

■

Enable/disable the network controller.

Table 2-4

System Configuration Menu (

Continued)

Select

To do this

Summary of Contents for Compaq NX7300



















































































































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands