manualshive.com logo in svg

HP Compaq NX7300, Maintenance And Service Manual

Share
Download
HP Compaq NX7300 Maintenance And Service Manual Download Page 34

Troubleshooting

Maintenance and Service Guide

2–7

Diagnostics Menu

System Configuration Menu

✎

Some of the listed System Configuration options may not be 
supported by your computer.

Table 2-3

Diagnostics Menu

Select

To do this

Hard Drive Self-Test 
options

Run a comprehensive self-test on any hard drive in 
the system or on any optional MultiBay hard drive.

Memory Check

Run a comprehensive check on system memory.

Startup Check (select 
models only)

Verify the system components needed for starting the

computer.

Table 2-4

System Configuration Menu

Select

To do this

Language (or press 

f2

)

Change the Computer Setup language.

Boot options

■

Set 

f9

, 

f10

, and 

f12

 delay when starting up.

■

Enable/disable CD-ROM boot.

■

Enable/disable floppy boot.

■

Enable/disable internal network adapter boot and 
set the boot mode (PXE or RPL).

■

Enable/disable MultiBoot, which sets a boot order 
that can include most boot devices in the system.

■

Set the Express Boot Popup delay in seconds.

■

Set the boot order.

Summary of Contents for Compaq NX7300



















































































































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands