manualshive.com logo in svg

HP Compaq NX7300, Maintenance And Service Manual

Share
Download
HP Compaq NX7300 Maintenance And Service Manual Download Page 125

5–32

Maintenance and Service Guide

Removal and Replacement Procedures

4. Make note of which antenna cable is attached to which 

antenna clip on the Mini Card module before disconnecting 
the cables, then disconnect the auxiliary and main antenna 
cables 

1

 from the Mini Card module.

5. Remove the two Phillips PM2.0×4.0 screws 

2

 that secure the 

Mini Card module to the computer. (The edge of the module 
opposite the socket rises away from the computer.)

6. Remove the Mini Card module by pulling the module 

3

 

away from the socket at an angle.

✎

Mini Card modules are designed with a notch 

4

 to prevent 

incorrect installation.

Removing a Mini Card Module

Reverse the above procedure to install a Mini Card module.

Summary of Contents for Compaq NX7300



















































































































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands