HP Compaq NX7300 Maintenance And Service Manual Download

Page: 212 / 242

Maintenance and Service Guide

D–1

Display Component Recycling

WARNING:

The backlight contains mercury. Caution should be

exercised when removing and handling the backlight to avoid

damaging this component and causing exposure to the mercury.

CAUTION:

The procedures in this appendix can result in damage to

display components. The only components intended for recycling

purposes are the liquid crystal display (LCD) panel and the backlight.

Careful handling should be exercised when removing these

components.

✎

Materials Disposal

This HP product contains mercury in the backlight in the display
assembly that might require special handling at end-of-life.

Disposal of mercury may be regulated because of environmental
considerations. For disposal or recycling information, contact
your local authorities or the Electronic Industries Alliance (EIA)
at

http://www.eiae.org

Summary of Contents for Compaq NX7300



















































































































































































































































Search results

Summary of Contents for Compaq NX7300

Reviews:

Related manuals for Compaq NX7300

Brands by name

Popular brands

HP Compaq NX7300, Maintenance And Service Manual

Search results

Summary of Contents for Compaq NX7300

Reviews:

Related manuals for Compaq NX7300

Brands by name

Popular brands