manualshive.com logo in svg

HP Compaq NX7300, Maintenance And Service Manual

Share
Download
HP Compaq NX7300 Maintenance And Service Manual Download Page 87

4–2

Maintenance and Service Guide

Removal and Replacement Preliminaries

4.2 Service Considerations

The following sections include some of the considerations 
that you should keep in mind during disassembly and assembly 
procedures.

✎

As you remove each subassembly from the computer, place 
the subassembly (and all accompanying s) away from the work 
area to prevent damage.

Plastic Parts

Using excessive force during disassembly and reassembly can 
damage plastic parts. Use care when handling the plastic parts. 
Apply pressure only at the points designated in the maintenance 
instructions.

Cables and Connectors

Ä

CAUTION: 

When servicing the computer, be sure that cables are 

placed in their proper locations during the reassembly process. 

Improper cable placement can damage the computer.

Cables must be handled with extreme care to avoid damage. 
Apply only the tension required to unseat or seat the cables 
during removal and insertion. Handle cables by the connector 
whenever possible. In all cases, avoid bending, twisting, or 
tearing cables. Be sure that cables are routed in such a way that 
they cannot be caught or snagged by parts being removed or 
replaced. Handle flex cables with extreme care; these cables 
tear easily.

Summary of Contents for Compaq NX7300



















































































































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands