manualshive.com logo in svg

HP Compaq NX7300, Maintenance And Service Manual

Share
Download
HP Compaq NX7300 Maintenance And Service Manual Download Page 205

C–2

Maintenance and Service Guide

Backup and Recovery in Windows XP

To create a set of recovery discs:

1. Select 

Start > All Programs > HP Backup & Recovery > 

HP Backup and Recovery Manager

.

2. Click 

Next

.

3. Click 

Create factory software recovery CDs or DVDs to 

recover the system (Highly recommended)

, and then click 

Next

.

4. Follow the on-screen instructions.

Backing Up Your Information

✎

You can only recover files that you have previously backed up. 
HP recommends that you use HP Backup and Recovery 
Manager to create an entire drive backup as soon as you set up 
your computer.

With HP Backup and Recovery Manager, you can perform the 
following tasks:

■

Backing up your information regularly to protect your 
important system files

■

Creating system recovery points that allow you to reverse 
undesirable changes to your computer by restoring the 
computer to an earlier state

■

Scheduling backups at specific intervals or events

When to Back Up

■

On a regularly scheduled basis

✎

Set reminders to back up your information periodically.

■

Before the computer is repaired or restored

■

Before you add or modify hardware or software

Summary of Contents for Compaq NX7300



















































































































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands