Maintenance and Service Guide
C–1
C
Backup and Recovery in
Windows XP
Creating Recovery Discs
After setting up the computer for the first time, be sure to create a
set of recovery discs of the full factory image. The recovery discs
are used to start up (boot) the computer and recover the operating
system and software to factory settings in case of system
instability or failure.
Note the following guidelines before creating recovery discs:
■
You will need high-quality CD-R, DVD-R, or DVD+R
media (purchased separately).
✎
Formatted DVD±RW discs and DVD±RW double-layer
discs are not compatible with HP Backup and Recovery
Manager.
■
The computer must be connected to AC power during the
process.
■
Only one set of the recovery discs can be created per
computer.
■
Number each disc before inserting it into the optical drive of
the computer.
■
If necessary, you can cancel the disc creation before you have
finished creating the recovery discs. The next time you select
Create factory software recovery CDs or DVDs to recover
the system (Highly recommended)
, you will be prompted to
continue the disc creation.
Summary of Contents for Compaq NX7300
