HP Compaq nc6000 Software Manual Download Page 83

Page: 83 / 94

9–2

Software Guide

Software Updates and Restorations

Obtaining the Support Software CD

The

Support Software

CD provides HP software updates and

installation instructions. The CD includes device drivers, ROM
updates, and utilities.

To purchase the current

Support Software

CD or a subscription

that provides both the current version and future versions of the
CD, visit the HP Web site at

http://www.hp.com.

Accessing Notebook Information

To access the updates for your notebook, the following
information will be needed:

■

The product

category

is Notebook.

■

The product

family

name and

series

number are printed in the

lower right corner of the display bezel.

■

Model

information is provided on the serial number label on

the bottom of the notebook.

To determine whether available ROM updates contain later ROM
versions than those currently installed on the notebook, you need
to know the version of the system ROM currently installed.

ROM version information can be displayed in Computer Setup.
For information about using Computer Setup, refer to the

“Computer Setup”

chapter.

333634-001.book Page 2 Friday, July 18, 2003 8:47 AM

Summary of Contents for Compaq nc6000































































































Search results

Summary of Contents for Compaq nc6000

Reviews:

Related manuals for Compaq nc6000

Brands by name

Popular brands

HP Compaq nc6000, Software Manual

Search results

Summary of Contents for Compaq nc6000

Reviews:

Related manuals for Compaq nc6000

Brands by name

Popular brands