HP Compaq nc6000 Software Manual Download Page 89

Page: 89 / 94

9–8

Software Guide

Software Updates and Restorations

To reinstall the operating system:

1. Connect the notebook to external power and turn on the

notebook.

2. Immediately insert the

Operating System

CD into the

notebook.

3. Press and hold the power button for 5 seconds to turn off the

notebook.

4. Press the power button again to start the notebook.

5. When prompted, press any key to boot from the CD. After

a few minutes, the Welcome to Setup screen is displayed.

6. Press

enter

to continue. A Licensing Agreement screen is

displayed.

7. Press

to accept the agreement and continue. The Setup

window is displayed.

8. Press

esc

to continue installing a new copy of the operating

system instead of repairing it.

9. Press

enter

to set up the operating system.

10. Press

to continue setup using this partition.

11. Select Format the partition using the NTFS file system

(Quick) and press

enter.

CAUTION:

Formatting this drive will delete all current files.

12. Press

to format the drive. The reinstallation process begins.

This process may take 1–2 hours to complete. The notebook
restarts in Windows when the process is complete.

✎

When prompted for the product key, refer to the Microsoft
Certificate of Authenticity label located on the bottom of the
notebook.

333634-001.book Page 8 Friday, July 18, 2003 8:47 AM

Summary of Contents for Compaq nc6000































































































Search results

Summary of Contents for Compaq nc6000

Reviews:

Related manuals for Compaq nc6000

Brands by name

Popular brands

HP Compaq nc6000, Software Manual

Search results

Summary of Contents for Compaq nc6000

Reviews:

Related manuals for Compaq nc6000

Brands by name

Popular brands