manualshive.com logo in svg

HP Codemaster 100, User Manual, Page: 236 / 270

Share
Download
HP Codemaster 100 User Manual Download Page 236

0DLQWHQDQFH

CodeMaster 100

13-2

Every Day

o 

Inspect the battery in the HP CodeMaster 100 for visible signs of wear.

o 

Turn on the HP CodeMaster 100. If the instrument displays the 

LOW 

BATTERY

 message, replace the battery with a charged battery.

o 

Visually check the patient cables, paddles, cables, and pads adapter 
cables for wear, insulation nicks, and other damage.

o 

Perform the “Delivered Energy and Shock Button Functional Test” on 
page 13-3.

o 

Perform the “Electrode Adapter Cable Test” on page 13-4.

o 

Perform the “Quick Pacer Functionality Test” on page 13-5.

o 

Make sure that a battery is charging in the battery support system.

If you have the advisory option:

o 

Turn the 

Energy Select

 control to 

Advisory On

, and check that the 

instrument turns on.

Summary of Contents for Codemaster 100















































































































































































































































































Reviews:

No comments