HP BACKCOPY Reference Manual Download

Page: 189 / 303

Cause.

Although the EXT option was used, the extent-size specification was ignored because extent

sizes for unstructured files must remain the same.

Effect.

BACKUP or RESTORE converts the file with the old extent sizes.

Recovery.

Informational message only; no corrective action is needed.

7025

File skipped. File does not have alternate key file
specified with ALTFILE.

Cause.

The ALTFILE option was used to specify an alternate-key file that does not exist for the file.

Effect.

BACKUP or RESTORE skips the file and proceeds to the next file.

Recovery.

Informational message only; no corrective action is needed.

7026

File skipped. File does not have secondary partition
specified with PART.

Cause.

A partition was specified with the PART option, but the file does not have a secondary

partition.

Effect.

BACKUP or RESTORE skips the file and proceeds to the next file.

Recovery.

Informational message only; no corrective action is needed.

7027

No files written on tape.

Cause.

BACKUP was unable to write any files to tape because of previous errors.

Effect.

BACKUP terminates.

Recovery.

Create a new BACKUP tape after correcting any errors.

7028

File aborted (Error nnn).

Cause.

A file-system error occurred.

Effect.

BACKUP or RESTORE skips the file and proceeds to the next file.

Recovery.

For the appropriate corrective action for the error number indicated by

nnn

, see the

Guardian Procedure Errors and Messages Manual.

7029

Volume aborted (Error nnn).

Cause.

A file-system error occurred.

Effect.

BACKUP or RESTORE skips the file and proceeds to the next file.

Recovery.

For the appropriate corrective action for the error number indicated by

nnn

, see the

Guardian Procedure Errors and Messages Manual.

7025 189

Summary of Contents for BACKCOPY
















































































































































































































































































































Search results

Summary of Contents for BACKCOPY

Reviews:

Related manuals for BACKCOPY

Brands by name

Popular brands

HP BACKCOPY, Reference Manual

Search results

Summary of Contents for BACKCOPY

Reviews:

Related manuals for BACKCOPY

Brands by name

Popular brands