HP BACKCOPY Reference Manual Download

Page: 258 / 303

8113

Wrong tape mounted (Found tape #tape-num, expected tape
#expected-tape-num).

Cause.

The wrong tape from a multitape tape set was mounted.

Effect.

RESTORE rewinds and unloads the tape and prompts for the correct tape.

Recovery.

Mount the correct tape.

8115

An EOF mark was not found after the Archive volume label set.

Cause.

An invalid tape format was discovered.

Effect.

RESTORE rewinds and unloads the tape and prompts for the correct tape.

Recovery.

Check the tape and remount it. If the problem persists, see the cause and recovery for

error

8025 (page 237)

8116

Bad length for standard tape header label.

Cause.

An invalid tape format was discovered.

Effect.

RESTORE rewinds and unloads the tape and prompts for the correct tape.

Recovery.

Check the tape and remount it. If the problem persists, see the cause and recovery for

error

8025 (page 237)

8117

Standard tape header label not found.

Cause.

An invalid tape format was discovered.

Effect.

RESTORE rewinds and unloads the tape and prompts for the correct tape.

Recovery.

Check the tape and remount it. If the problem persists, see the cause and recovery for

error

8025 (page 237)

8118

Standard tape header label is out of sequence.

Cause.

An invalid tape format was discovered.

Effect.

RESTORE rewinds and unloads the tape and prompts for the correct tape.

Recovery.

Check the tape and remount it. If the problem persists, see the cause and recovery for

error

8025 (page 237)

8119

File-system error n occurred on the first I/O operation
attempted.

258 BACKCOPY, BACKUP, and RESTORE Messages

Summary of Contents for BACKCOPY
















































































































































































































































































































Search results

Summary of Contents for BACKCOPY

Reviews:

Related manuals for BACKCOPY

Brands by name

Popular brands

HP BACKCOPY, Reference Manual

Search results

Summary of Contents for BACKCOPY

Reviews:

Related manuals for BACKCOPY

Brands by name

Popular brands