HP BACKCOPY Reference Manual Download

Page: 224 / 303

7770

Bad density number. Expecting 800, 1600, or 6250.

Cause.

An invalid density number was specified.

Effect.

BACKUP or RESTORE terminates.

Recovery.

Reenter the command with a valid density number.

7771

Only a single volume can be backed up when VOL is specified.

Cause.

An attempt was made to dump more than one volume by using the VOL parameter.

Effect.

BACKUP terminates.

Recovery.

Restrict the backup to one volume.

7772

Only a single volume and subvolume can be dumped when a
subvolume is specified with VOL.

Cause.

An attempt was made to dump more than one volume and subvolume by using the VOL

parameter.

Effect.

BACKUP terminates.

Recovery.

Restrict the BACKUP to one subvolume.

7774

Not allowed to specify BLOCKSIZE or REMOTEIOSIZE with
OLDFORMAT.

Cause.

An attempt was made to use BLOCKSIZE or REMOTEIOSIZE with the OLDFORMAT option.

Effect.

BACKUP terminates.

Recovery.

Reenter the command without specifying the BLOCKSIZE or REMOTEIOSIZE option.

7775

Not allowed to specify VERIFYTAPE/VERIFYREEL with OLDFORMAT.

Cause.

An attempt was made to use either VERIFYTAPE or VERIFYREEL with the OLDFORMAT

option.

Effect.

BACKUP terminates.

Recovery.

Old format tapes do not contain checksums and sequence numbers to verify. Reenter

the command without specifying the VERIFYTAPE or VERIFYREEL option.

7776

Not allowed to specify both VERIFYTAPE and VERIFYREEL.

224 BACKCOPY, BACKUP, and RESTORE Messages

Summary of Contents for BACKCOPY
















































































































































































































































































































Search results

Summary of Contents for BACKCOPY

Reviews:

Related manuals for BACKCOPY

Brands by name

Popular brands

HP BACKCOPY, Reference Manual

Search results

Summary of Contents for BACKCOPY

Reviews:

Related manuals for BACKCOPY

Brands by name

Popular brands