HP BACKCOPY Reference Manual Download

Page: 193 / 303

Cause.

An entire partitioned file was terminated. This message is preceded by an error message

indicating that a file was terminated.

Effect.

BACKUP or RESTORE skips the entire partitioned file and proceeds to the next file.

Recovery.

Correct the error that caused the partition to be terminated, and retry the operation on

the file.

7044

File not dumped (Error nnn).

Cause.

A file-system error occurred when BACKUP was trying to copy the file.

Effect.

BACKUP skips the offending file and continues processing the rest of the file set.

Recovery.

For corrective action for the error number indicated, see the Guardian Procedure Errors

and Messages Manual and then rerun BACKUP.

7045

File not restored (Error nnn).

Cause.

A file-system error occurred when RESTORE was trying to copy the file to disk.

Effect.

RESTORE skips the offending file and continues processing the rest of the file set.

Recovery.

For corrective action for the error number indicated, see the Guardian Procedure Errors

and Messages Manual, then rerun RESTORE.

7046

Secondary partition not found.

Cause.

BACKUP of a partitioned file whose secondary partition volume is down.

Effect.

BACKUP of the file fails.

Recovery.

Bring up the volume on which the secondary partition is present.

7047

File aborted. Parity error encountered on tape file label.

Cause.

A parity error was encountered on the tape file label.

Effect.

RESTORE skips the file and proceeds to the next file.

Recovery.

The file cannot be restored if the parity error occurs on any tape drive.

7048

File aborted. Checksum error encountered on tape file label.

Cause.

Checksum error encountered on the tape file label.

Effect.

RESTORE skips the file and proceeds to the next file.

Recovery.

The file cannot be restored if the checksum error occurs on any tape drive.

7044

193

Summary of Contents for BACKCOPY
















































































































































































































































































































Search results

Summary of Contents for BACKCOPY

Reviews:

Related manuals for BACKCOPY

Brands by name

Popular brands

HP BACKCOPY, Reference Manual

Search results

Summary of Contents for BACKCOPY

Reviews:

Related manuals for BACKCOPY

Brands by name

Popular brands