HP BACKCOPY Reference Manual Download

Page: 228 / 303

Recovery.

Reissue the command without wild-card characters in the START option.

7794

Not allowed to specify PARTOF and PART together.

Cause.

An attempt was made to use PARTOF with the PART option.

Effect.

RESTORE terminates.

Recovery.

Reenter the command, specifying either PARTOF or PART.

7795

3 character alphabetic month name expected.

Cause.

The month name in the BACKUP PARTIAL option is not in the required three-character

alphabetic format.

Effect.

BACKUP fails and terminates.

Recovery.

Specify month using three characters and reissue the command. For example, JAN, FEB,

MAR, AUG, SEP, DEC.

7796

NOT fileset list has already been specified.

Cause.

The NOT file-set list was specified more than once in the BACKUP or RESTORE command.

Effect.

BACKUP or RESTORE fails and terminates.

Recovery.

Specify a file-set list for the NOT option that does not conflict with a file-set specified in

another option and reissue the command.

7797

Only allowed to restore a single volume when PARTOF is
specified and a new volume is specified with VOL.

Cause.

When the VOL option is used with the PARTOF option in RESTORE, only one volume can

be specified in

restore-files

Effect.

RESTORE fails and terminates.

Recovery.

Reissue the command with only one volume name specified in

restore-files

7799

Volume is not accessible or does not exist.

Cause.

An invalid volume name or an inaccessible volume was specified for the VOL option in the

RESTORE command.

Effect.

RESTORE fails and terminates.

Recovery.

Reissue the command without the offending volume name.

228 BACKCOPY, BACKUP, and RESTORE Messages

Summary of Contents for BACKCOPY
















































































































































































































































































































Search results

Summary of Contents for BACKCOPY

Reviews:

Related manuals for BACKCOPY

Brands by name

Popular brands

HP BACKCOPY, Reference Manual

Search results

Summary of Contents for BACKCOPY

Reviews:

Related manuals for BACKCOPY

Brands by name

Popular brands