HP BACKCOPY Reference Manual Download

Page: 232 / 303

Effect.

RESTORE fails and terminates.

Recovery.

Reissue the command without these two options together or with the KEEP option added.

7831

Invalid REMOTEIOSIZE. Must be in the range 2 .. 52 and even.

Cause.

An invalid number was entered for REMOTEIOSIZE in a BACKUP command.

Effect.

BACKUP fails and terminates.

Recovery.

Reissue the command specifying an even number from 2 to 52.

7832

PARTONLY must be set when setting SQLTAPEPARTARRAY.

Cause.

The SQLTAPEPARTARRAY option was specified in a RESTORE command, but PARTONLY

was not specified.

Effect.

RESTORE fails and terminates.

Recovery.

Reissue the RESTORE command including the PARTONLY option.

7833

The NOSQLDATA and SQLCATALOGS parameters are mutually
exclusive.

Cause.

A BACKUP or RESTORE command was issued including both the NOSQLDATA and

SQLCATALOGS option, which cannot be used in the same command.

Effect.

BACKUP or RESTORE fails and terminates.

Recovery.

Reissue the BACKUP or RESTORE command using only one of these options.

7834

The NOUNLOAD and NOREWIND parameters are mutually exclusive.

Cause.

This error could be caused by:

•

The NOUNLOAD and NOREWIND options were both specified for BACKUP.

•

The NOUNLOAD and NOREWIND options were both specified for RESTORE.

•

The NOUNLOADIN and NOREWINDIN options were both specified for BACKCOPY.

•

The NOUNLOADOUT and NOREWINDOUT options were both specified for BACKCOPY.

Effect.

The utility fails and terminates.

Recovery.

Reissue the command with the correct options.

7835

Expecting either ON, OFF, PARTIAL, or nothing (the default is
ON).

Cause.

An incorrect parameter in the PARTONLY option was specified in the RESTORE command.

232 BACKCOPY, BACKUP, and RESTORE Messages

Summary of Contents for BACKCOPY
















































































































































































































































































































Search results

Summary of Contents for BACKCOPY

Reviews:

Related manuals for BACKCOPY

Brands by name

Popular brands

HP BACKCOPY, Reference Manual

Search results

Summary of Contents for BACKCOPY

Reviews:

Related manuals for BACKCOPY

Brands by name

Popular brands