HP BACKCOPY Reference Manual Download | Manualshive

Page: 186 / 303

background image

Cause.

An attempt to restore a file that was previously audited by TMF was successful, but the file

is not currently audited. This can occur when the file is restored, TMF has not been started, or TMF
has not been configured.

Effect.

The file is restored, and RESTORE continues execution.

Recovery.

Audit the file using TMF.

7011

File is audited.

Cause.

The file that was backed up was audited by TMF.

Effect.

None.

Recovery.

Informational message only; no corrective action is needed.

7012

Disk data error encountered (Error n, Address b, Length l).

Cause.

BACKUP encountered an error when trying to read the file data.

Effect.

BACKUP skips the file and proceeds to the next file.

Recovery.

Contact your service provider and provide all relevant information:

•

The information in this message

•

Description of the problem and accompanying symptoms

•

Supporting documentation such as Event Management Service (EMS) logs, trace files, and a
processor dump, if applicable

If your local operation procedures require contacting the GCSC, supply your system number and
the numbers and versions of all related products as well.

7013

Data lost (Error n Address b, Length l).

Cause.

BACKUP encountered an error when trying to read data. The IGNORE option was specified.

Effect.

None of the data could be read. Because the IGNORE option was specified, all zeros are

written to tape for the data.

Recovery.

Contact your service provider and provide all relevant information:

•

The information in this message

•

Description of the problem and accompanying symptoms

•

Supporting documentation such as Event Management Service (EMS) logs, trace files, and a
processor dump, if applicable

If your local operation procedures require contacting the GCSC, supply your system number and
the numbers and versions of all related products as well.

7014

Data bad (Error n, Address b, Length l).

Cause.

BACKUP encountered an error trying to read data. The IGNORE option was specified.

186 BACKCOPY, BACKUP, and RESTORE Messages

«
...
184
185
186
187
188
...
»

Summary of Contents for BACKCOPY
















































































































































































































































































































Reviews:

No comments

Related manuals for BACKCOPY

Brand: ScanSoft Pages: 33

MultiRack SoundGrid

Brand: Waves Pages: 39

Discover ActiveX

Brand: Teklynx Pages: 165

Brand: National Instruments Pages: 63

Network Video Recorder

Brand: ACTi Pages: 132

Brand: Avermedia Pages: 97

Brand: Extron electronics Pages: 124

Brand: Oracle Pages: 110

131018 - StorView Snapshot - Mac

Brand: LaCie Pages: 214

Brand: Janome Pages: 6

Brand: Icom Pages: 16

Brand: Navigon Pages: 95

Brand: Sharp Pages: 60

e-Copy ShareScan

Brand: Sharp Pages: 38

Brand: Sharp Pages: 48

Brand: AMX Pages: 3

MOBILE ANTIVIRUS - FOR WINDOWS MOBILE

Brand: ESET Pages: 2

Brand: Anthem Pages: 1

Brands by name

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Popular brands

Load more brands