HP AK373A - StorageWorks All-in-One Storage System 1200r 5.4TB SAS Model NAS Server, User Manual

Page: 138 / 216

NOTE:
Do not tamper with the “DON’T ERASE” or local C: volume. These are reserved volumes and must
be maintained as they exist.
Storage management utilities
The storage management utilities pre-installed on the storage system include the HP Array Configuration
Utility (ACU).
Array management utilities
Storage devices for RAID arrays and LUNs are created and managed using the array management
utilities mentioned previously. For HP Smart Arrays use the ACU.
NOTE:
The ACU is used to configure and manage array-based storage. You need administrator or root privileges
to run the ACU.
Array Configuration Utility
The HP ACU supports the Smart Array controllers and hard drives installed on the storage system.
To open the ACU from the storage system desktop:
NOTE:
If this is the first time that the ACU is being run, you will be prompted to select the Execution Mode for
ACU. Selecting Local Application Mode allows you to run the ACU from a Remote Desktop, Remote Console,
or storage system web access modes. Remote Service Mode allows you to access the ACU from a remote
browser.
1. Select Start > Programs > HP Management Tools > Array Configuration Utility .
2. If the Execution Mode for ACU is set to Remote Mode, log in to the HP System Management
Homepage. The default user name is
administrator and the default password is hpinvent .
To open the ACU in browser mode:
NOTE:
Confirm that the ACU Execution Mode is set to remote service.
1. Open a browser and enter the server name or IP address of the destination server. For example,
http://servername:2301
or
http://192.0.0.1:2301
.
2. Log in to the HP System Management Homepage. The default user name is administrator and
the default password is hpinvent .
File server management 138