Troubleshooting 95
Events Agent
status
Management
Server 1 status
Management
Server 2 status
Two UPSs are on battery power and
redundant power is lost
Two UPSs have shut down
-
-
-
-
-
Both UPSs have lost communication
SLES 10 agent does not autostart after power fail or
reboot
Action:
Follow the instructions for installing the agent on SLES 10 (on page
35
).
Servers running Windows® Server 2003 do not
restart
Symptom:
Servers running Windows® Server 2003 do not restart upon power restoration following a
power fail shutdown.
Possible Cause:
This is a known Windows® Server 2003 behavior on some servers.
Action:
Refer to the Microsoft® Knowledge Base article 819760.
Shutdowns not functioning when Any Server is
configured in a redundant configuration
Action:
Reconfigure the management server information on the agent.
1.
Open the agent configuration program for your operating system.
o
Windows ("
Reconfiguring the agent on Windows operating systems
" on page
32
)
o
Linux ("
Reconfiguring the agent on Linux operating systems
" on page
36
)
o
HP-UX ("
Reconfiguring the agent on HP-UX operating systems
" on page
39
)
2.
Enter the correct IP address, host name, communications port, or serial path for the first management
server that should communicate with the agent. Do not select
Any Server
from the dropdown box in
Windows or enter an asterisk (*) where prompted for Linux or HP-UX.
3.
Enter the correct IP address, host name, communications port, or serial path for the second
management server that should communicate with the agent. Do not select
Any Server
from the
dropdown box in Windows or enter an asterisk (*) where prompted for Linux or HP-UX.
4.
Close the configuration program.
Silent install did not execute successfully
Action:
