HP UPS Management Module web interface 62
Trap Receivers tab
This screen enables administrators to enter information for servers that should receive SNMP traps from
the management module.
To configure which servers should receive traps:
1.
Enable SNMP traps for up to 10 servers.
2.
Enter the IP address for up to 10 trap recipients in the IP Address field.
3.
Enter the community string for each trap recipient.
4.
Do one of the following:
o
Click
Save Settings
to save the information.
o
Click
Undo Changes
to undo the changes.
o
Click
Help
to view online help.
5.
Click
Send Test Trap
to send a test SNMP trap.
SNMP Managers tab
This screen enables administrators to enter information for SNMP managers. SNMP managers are
computers that use the HP Power MIB to request information from the management module.
