HP 9000 Series 700, Manual

Page: 80 / 222

80
Configuring SNMP MIB data 7
Configuring SNMP MIB data
The Configure SNMP/MIB Data Configuration screen is used to specify the
SNMP-specific data to be stored on the DTC. This data can only be configured on
the DTC after a hardware reset and can be modified by an authorized SNMP
manager workstation after initial download.
1 Use this screen to enter SNMP data values and then press the Perform Task (F4)
function key to return to the Rear Panel Configuration screen.
2 You must reset the DTC when you modify these SNMP parameters.
3 Exit from dtcconfig and reset the DTC by typing the following command at the
shell prompt:
dtcreset dtcname
tsta195:root:/opt/dtcmgr/sbin
DTC Configuration Main Menu
Highlight an item and then press “Return” or “Select Item” (F4).
Add DTC Configuration ..
Modify DTC Configuration ....
Delete DTC Configuration ...
Modify Default Parameters ->
Help for Using DTCconfig
Help
Shell
Select
Item
tsta195:root
Exit
DTCconf
DTC Name Click here, or press F1 for online help
Rear Panel Configuration
Action Menu (F5)
Configure SNMP/MIB
Board = C or L
Data Parameters