HP 9000 Series 700, Manual

Page: 79 / 222

79
Configuring SNMP authorization filters
7
SNMP authorization filter parameter definitions
SNMP Manager IP
Address
Enter the IP address of an SNMP manager that can monitor and control the DTC as
an SNMP network element.
A value of 0.0.0.0 in this field means that any SNMP manager that has the same
community name as the community name corresponding to this IP address can
access this DTC’s MIB parameters.
The IP address 255.255.255.255 is not valid in this field.
SNMP Authorization Filters Configuration screen
SNMP Manager
Community Name
Enter the name of the SNMP community to which the DTC belongs (all ASCII
characters are valid).
1
MIB Access
Choose Read & Write or Read Only. These values determine the access rights of
the SNMP manager to the SNMP parameters of the DTC.
MIB View
Choose DTC MIB or MIB-II. These values determine the subset of MIB objects
that the SNMP manager can access. Selecting DTC MIB enables the SNMP
manager to access both the SNMP MIB-II and HP-UX MIB objects.
1 If two SNMP authorization filters have the same SNMP manager community name they must also
have the same MIB access and MIB view values.
tsta195:root:/opt/dtcmgr/sbin
SNMP Authorization Filter Configuration
tsta195:root
Exit
Task
Perform
Fill in or modify the desired fields and then press “Perform Task”
011.022.033.044
015.123.123.111
015.111.111.123
Task
wally LAN board
SNMP Manager
IP Address
SNMP Manager Community Name MIB Access MIB View
site 1_________________________
site 2_________________________
site 3_________________________
Read Write
Read Only
Read Only
DTC MIB
DTC MIB
DTC MIB
Help
Shell
Default
Values