HP 9000 Series 700, Manual

Page: 29 / 222

29
Installing DTC Manager/UX with HP-UX 10.x
3
Note Quotation marks are mandatory if you are declaring more than one device and a space
is not allowed after the equal (
=
) sign.
Caution Do not remove any existing LAN device declarations from this line. This information
might be needed for other system functions.
3 Save the file (if you made any modifications) and exit the editor.
Running the daemons without rebooting
DTC Manager/UX cannot run without the required daemon processes.
Note The
netdaemons
configuration file must contain the values described in the
previous section before you can start the daemons without rebooting your system.
Normally, the daemons are started automatically each time you boot your system. If
you do not want to reboot your system at this time you can start the daemons
manually by following the steps below:
1 If the required daemons are not already running on your system, start them by
entering:
/sbin/init.d/rbootd start
to start the
rbootd
daemon.
2 Enter:
/sbin/init.d/dtcmgr start
to start the
dtcnmd
and
dtcnmp
daemons.
Proceed to the next section to verify that the daemons are running.